Roof air conditioners for vehicle cabs and mini buses
 Diavia roof air conditioners are available in six performance categories covering a capacity range from 4 kW to 15.5 kW. Each model comes in two optional versions – for 12- or 24-volt operation. All units feature high-performance condensers and evaporators accommodated in a beautifully shaped, compact roof structure. The same applies to driers, ventilators, cabling and hoses, all pre-assembled for convenient installation. Impeccable air conditioner operation is guaranteed at all times, even in inclined position. This is because the A/C compressor is driven by the vehicle engine.
Six models to suit every demand
A perfect fit for vehicle cabins and mini buses
| Model |
Capacity in kW |
Air flow |
Recommended application |
|
| Portofino |
4 |
400 m3/h |
Vehicle cabins |
 |
| Rimini |
6.2 |
550 m3/h |
Vehicle cabins, mini buses up to 6 seats |
 |
| Turin |
8.4 |
760 m3/h |
Mini buses up to 10 seats |
 |
| Smirne |
11.7 |
1400 m3/h |
Mini buses up to 14 seats |
|
| Santa Fe |
10.5 |
1200 m3/h |
Mini buses up to 16 seats |
 |
| Madrid |
15.5 |
2100 m3/h |
Mini buses up to 25 seats |
|
Excavator cabin or bus:
A modular system for all applications
What does a tight excavator cab have in common with a spacious 25-seat mini bus? Both can easily be equipped with a Diavia roof air conditioner! The modular system design allows for individual configuration to suit specific applications. Each system consists of a roof air conditioner unit complemented – depending on the installation requirements – by a ventilation panel (MODULE 1) or a modular air vent channel (MODULE 2). For mini buses with aisle between the seats, the air conditioner can be combined with air vent channels to be fitted by the trim manufacturer, e.g. during installation of the luggage racks (MODULE 3). A separate control unit (not required if you opt for a ventilation panel with integrated controls), a vehicle-specific engine mounting kit and a set of hoses and fittings complete the system.
From single components to a complete system
MODULE 1 |
MODULE 2 |
MODULE 3 |
Roof air conditioner
with ventilation panel |
Roof air conditioner
with modular air vent channel |
Roof air conditioner
with air vent channel from trim supplier |
|
Roof air conditioner
Portofino, Rimini, Turin or Smirne
|
Roof air conditioner
Rimini, Turin or Smirne
|
Roof air conditioner
Santa Fe or Madrid
|
 |
 |
 |
|
Ventilation panel
with or without control unit
|
Air vent channel
in modular design
|
Air vent channel
to be fitted by trim manufacturer |
|
|
|
|
Separate control unit
(only for ventilation panels
without control unit)
|
Separate control unit
|
Separate control unit
|
|
|
|
|
Engine mounting kit
|
Engine mounting kit
|
Engine mounting kit
|
|
|
|
|
Hoses/fittings
|
Hoses/fittings
|
Hoses/fittings
|
|
