ASC 2500 G Low Emission

  • ASC 2500 G Low Emission
ASC 2500 G Low Emission

Eco-friendly technology for use with R 134a: the ASC 2500 G Low Emission recovers almost 100% of the refrigerant during A/C service.

Read More ...

SKU: 9103301871 Compare this product? Add to compare .

Product Description

Also great as a diagnosis tool

The ASC 2500 G Low Emission integrates all refrigerant storage components on the weighing platform. That means the complete amount of refrigerant contained in the unit can be recorded and the amount of the recovered refrigerant can be exactly determined. This in turn will tell the operator about potential leaks in the A/C system.

The accurate diagnosis function of the ASC 2500 G Low Emission is also very useful with regard to decreasing refrigerant charging amounts on modern-day vehicles. In the compact car segment we already see models with charging amounts of less than 300 g (e.g. Daihatsu Cuore). Older A/C service units won’t be able to charge these systems with the required accuracy. Excessive or insufficient charging would entail major problems.

ASC 2500 G Low Emission in workshop
  • Sturdy metal housing
  • Charging cylinder storage capacity: 16 kg, vacuum pump capacity: 5 cars/h
  • Humidity free storage and feeding system for fresh oil and UV additive including test bottles
  • Print-out of important service data, several print-outs possible
  • Fully automatic refrigerant recycling, oil and additive management
  • Automatic vacuum check
  • Automatic charging of leak detection additive
  • Integrated refrigerant charging and recovery amount management
  • Integrated charging amount database
  • Complies with SAE J 2099 and SAE J 2788
  • Close to 100 % refrigerant recovery
  • Virtually 0 % service emission thanks to used oil container and Low Emission concept
  • Personalised charging amount database
  • Operator guidance via large display
  • Swivel-mount display and information unit
  • Heated charging cylinder for high-speed charging, heat-up also possible during the charging process
  • Special, 8-bearing weighing platform
  • Special air conditioner flush function
  • Also suitable for hybrid vehicles if the optional flushing kit for the ASC’s internal circuit was installed
  • Used oil container
  • Soft graphic display and USB interface

Well engineered: Used oil container prevents unnecessary refrigerant loss

Complete refrigerant recovery – including the residual amount contained in the used oil

Optional – gas analyser configured according to SAE standard: with robust metal housing and gas probe on low pressure side

null

LOW EMISSION

Virtually no refrigerant escaping into the environment and identification of the exact amount of the recovered refrigerant in the weighing procedure avoids unnecessary troubleshooting.
null

INDIVIDUAL USER CODE

To prevent unauthorised use of WAECO A/C service units, up to 10 user names can be programmed in combination with individual PIN codes.
null

PERSONALISED CHARGING

ASC-series units give you the option to create a personalised charging amount database for 100 different vehicles.

CLOSE TO 100 % DISCHARGE IN FOUR STEPS!

READ MORE ABOUT WAECO LOW EMISSION …

Product data

Power Supply

220/240 V – 50/60 Hz

Suitable for refrigerant

R 134a

Purity of recovered refrigerant according to SAE J 2099

yes

Refrigerant recovery rate in kg/h

30

Vacuum pump capacity

5 cars/h

Performance of the hermetic compressor in kW

0.32

Dry filter capacity in kg

150

Refrigerant recycling rate

Close to 100 %

Can be used as diagnosis tool

yes

Charging cylinder (kg)

16

Refrigerant analysis

no

Recovery/recycling

automatic

Purging of non-condensable gases

automatic / electronic

Purging of used oil

automatic

Evacuation

automatic

Vacuum check

automatic

Nitrogen leak check

no

Injection of leak detection additive

automatic

Injection of oil into the A/C system

automatic

Refrigerant charging

automatic

High/low pressure indicated by

Manometer

Vacuum indicated on

Display

Total process control via display

yes

Option to set the evacuation time

yes

Protocol print-out with printer

yes

USB connection for software- and database updates

yes

Printer

yes

Scope of delivery

Adapter for 500 ml fresh oil and UV tracer dye bottle
Dust cover
Goggles/safety gloves
Heated refrigerant tank
Hermetically closed used oil container (500 ml)
Operating instructions
Service hoses (SAE standard, 3m)
Test bottle of fresh oil WAECO DHO PS-F
Test bottle UV additive
Valve adapter for WAECO refrigerant bottles

Dimensions (W x H x D, in mm)

560 x 1300 x 650

Weight (kg)

100

Downloads

Accessories

Professional standard

ASC by WAECO is, and has been for years, the abbreviation for excellent quality and cutting-edge technology in A/C service equipment. The series is constantly improved and complemented to meet future requirements. All ASC service units are state of the art and fully automatic

Be a successfull A/C professional

Use our comprehensive range of equipment for service and repairs on automotive A/C systems to make your company an efficient and successful A/C workshop. Polar bear Eddie supports you with useful information and advertising material that will keep you an Eddie nose length ahead of your competitors!

CONTACT US

Dometic WAECO International GmbH
Hollefeldstraße 63
D-48282 Emsdetten

Tel +49 (0) 2572 879-0
Fax +49 (0) 2572 879-300
Mail info@dometic-waeco.de
Net www.dometic.de